Over the last century, great steps forward have been made in the working conditions in factories. In the latter part of the 1800’s, safety concerns were virtually non existent with hazards like high speed belts and pulleys all over the place, no ear, hand or eye protection and poor heating in winter. In one of my books, From Wagon to Trailer, I recount an interview with a man who started work in the factory in the early 1930’s when conditions still did not seem to have improved too much. He told of a man fatally injured when his coat got caught in a line shaft driving the belt pulleys and was spun round and round until the drive could be shut off. And of the painters who worked all day over large paint tanks dipping the finished product with no fumes protection.
In the mid twentieth century a well-known novel writer, Thomas B Costain, wrote about a young man growing up in an industrial city in his book “Son of a Hundred Kings”. It is well accepted that the city he based it on was Brantford and the young man’s experiences when first working at a foundry, also accepted as that of the Buck Stove Company, described graphically the conditions under which they worked in the latter part of the 1800’s.
Even in the 1940’s, when I served a five year engineering apprenticeship with a large engine manufacturer, many of the working conditions encountered would be totally unacceptable today. One machine on which I worked doing finish machining on compressor crankshafts, required a constant stream of cutting oil to run on to the workpiece. At the end of the shift, the full height leather apron I had to wear would be soaked in oil to the extent that every night, it was cleaned with trichlorethylene to remove the oil before the next day’s use.
In the forge adjacent to that machine shop, so much soot covered the windows,lights and floor that it was very difficult to see what was going on until one’s eyes adjusted to the dim light. Minimal eye protection was used and hearing protection was zero.
Even in a relatively clean place, as in this 1880 factory building steam engines, most times the work area would be so crowded that it became hazardous.
Today, health and worker legislation is such that one could no longer find such conditions in most of the advanced nations. In contrast, one factory that I recently wrote about had some of the best working conditions that I have ever seen, and I have been through hundreds of plants in my time. The plant was fully air conditioned, most of the machinery was computer controlled, and the walls and floors one could literally eat off. No, this was not an electronics manufacturer, but a company machining metals and making special assembly machines and tools.
A big step from the “good old days”.